Time to install the flap motor. The bushes need to be sprayed with Lithium grease and then installed.

Fairly easy install but just a bit fiddly to install. You must connect the flap motor arm to the flap actuating arm first as you can’t get the bolt in after.

Motor installed.

Next to be installed is the starter solenoid. A couple of M4 Rivnuts are installed with hex top screws to fix.

Now the Rotax control unit is installed using Rivnuts and screws.

The Firewall at the end of the day.

The engine needs to be lifted out of the crate and suspended whist the water pump is modified and engine mount is attached.

A bracket needed to be made from steel bar so it can be used for lifting.