Although the Teleflex cables are already installed the nuts need to have Loctite 243 applied and retightened to ensure they don’t loosen during service.

Not forgetting those underneath…

All the nuts and bolts also need to be checked.

Once checked then Torque Seal is applied so an easy visual check can be made to ensure that they haven’t loosened.

I wasn’t happy with the screws used for mounting the control unit so I removed the Rivnuts and used M6 stainless steel nuts and bolts instead.

A view of the Firewall with the Torque Seal clearly visible.

A tidy of the workshop was required to give me a bit more space on the workbench and clear area to work in.